Crankbrothers Mallet E LS

£164.99

Crankbrothers Mallet E LS

Description:

The ultimate pedal for enduro racing and riding.

The Crankbrothers Mallet E LS was developed with the help some well known enduro athletes.  Also, they are 12% smaller than the Mallet DH pedals but, with many of its well loved features.

Features:

  • Concave pedal platform for secure foothold.  Like it’s DH equivalent you get that flat pedal feel whilst running clipless.
  • 49g lighter and 12% smaller pedal body than the Crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.
  • Ribbed body. As a result, it allows for better traction when unclipped
  • Chamfered edges for reduction in rock strikes
  • Excellent mud-shedding: the design is very open.
  • 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.
  • Increased float: 6° of side-to-side rotational play.  The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal.  As a result, this allows for improved rider control and bike handling.
  • Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle.  Zero-float cleats can be purchased separately (link to these).
  • Customise the fit between your shoe/pedal interface by using integrated traction pads.  Furthermore, the pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.
  • Outer enduro cartridge bearing is designed specifically for pedals.  Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.
  • Inner igus LL-glide bearing has been exclusively formulated for crankbrothers.  It performs in even the most adverse conditions out on the trails.
  • Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.
  • crankbrothers pedals are fully re-buildable for simple maintenance.   There is a consistency in parts across all pedal models. Therefore, it allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051).

Specification:

  • Weight (per pair): 419g
  • Spindle: Forged scm 435 chromoly steel
  • Body: 6061-T6 aluminium
  • Wings: 17-4PH stainless
  • Spring: 300 series stainless steel
  • Inner bearing: Igus LL-glide bearing
  • Outer bearing: Enduro cartridge bearing
  • Pins: 12 pins per pedal
  • Cleats: Premium brass cleats included
  • Release angle: 15° or 20°
  • Warranty: 5 years
Shopping Cart
There are no products in the cart!
0